ABB IRB 6640 Foundry Prime - Inspecting the Axis-1 Mechanical Stop Pin

3.3.12 Inspecting the axis-1 mechanical stop pin
WARNING
Mechanical stop pin can not be fitted onto robot if option 810-1 Electronic Position
Switch is used.
Location of mechanical stop pin
The axis-1 mechanical stop is located as shown in the figure.
xx0600003436
Mechanical stop pin, axis 1A
Fixed mechanical stopB
Required equipment
Visual inspection, no tools are required.
Continues on next page
Product manual - IRB 6640 Foundry Prime 159
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
3 Maintenance
3.3.12 Inspecting the axis-1 mechanical stop pin