NoteArt. no.Equipment
Equivalent:
• Mercasol
3HAC034903-001Rust preventive
Option Foundry Prime3HAC026759-001Sikaflex 521FC
Content is defined in section
Standard tools on page 465.
Standard toolkit
These procedures include refer-
ences to the tools required.
Other tools and proced-
ures may be required. See
references to these proced-
ures in the step-by-step
instructions below.
Procedure
The following procedure details how to apply the rust preventive on bearing axis
1.
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
to the robot, before entering the robot working
area.
1
xx0700000445
Remove the cable guide.2
Parts:
• A: Cable guide
Wipe the surface under the cable guide.3
Continues on next page
Product manual - IRB 6640 Foundry Prime 199
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
3 Maintenance
3.6.2 Rust preventive measures, bearing axis 1 (Foundry Prime)
Continued
To Next Page
Loading...
