ABB IRB 6640 Foundry Prime - Page 467

Art. no.QtyDescription
3HAC13056-41Guide pins M12 x 250
3HAC13120-41Guide pins M16 x 250
3HAC13120-51Guide pins M16 x 300
3HAC14628-21Guide pins, sealing ax 2/3, 100mm
3HAC14628-11Guide pins, sealing ax 2/3, 80mm
3HAC029090-0011Holder for bits (Stahlwille 736/40 S 5/16")
3HAC11731-11Hydraulic cylinder
3HAC13086-11Hydraulic pump, 80 MPa
3HAC15994-11Lifting accessory, upper arm
3HAC027794-0011Lifting accessory. lower arm
3HAC032724-0011Lifting accessory, gearbox axis 3
3HAC025333-0012Lifting eye
3HAC16131-11Lifting eye VLBG M12
3HAC14457-42Lifting eye M16
3HAC15556-11Lifting tool (chain)
3HAC025214-0011Lifting tool, gearbox axis 2
6896134-GN1Measuring tool
3HAC021590-0011Oil injector / max 500 MPa
3HAC026594-0011Press gear axis 1
3HAC020902-0011Press tool, balancing device
3HAC020997-0011Shackle, balancing device
3HAC15535-11Support, base
3HAC028920-0011Tool set balancing device
Calibration equipment, Levelmeter (alternative method)
The following table specifies the calibration equipment required when calibrating
the robot with the alternative method, Levelmeter Calibration.
NoteArt. no.Description
68080011-LPAngle bracket
3HAC13908-9Calibration bracket
3HAC13908-4Calibration tool ax1
Includes one sensor.6369901-347Levelmeter 2000 kit
3HAC13908-5Measuring pin
68080011-GMSensor fixture
3HAC0392-1Sensor plate
3HAC13908-1Sync. adapter
Continues on next page
Product manual - IRB 6640 Foundry Prime 467
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
7 Reference information
7.7 Special tools
Continued