ABB IRB 6640 Foundry Prime

To Next Page

To Previous Page

xx0900000034

1) Assemble the

press tool D=54

(D) onto the

threaded bar (4).

2) Assemble the

threaded bar,

M16 with the

press tool

through the as-

sembled bearing.

3) Assemble the

Press tool D=103

(A) on to the

threaded bar,

M16.

4) Assemble the

hydraulic press

(1).

5) Assemble the

Knurled nut

D=80 (F).

Refitting front bearing and sealing Design 1

The following configuration is used for refitting of the front bearing and sealing

Design 1

xx0900000036

Configuration:

• 4

• F

• E

• C

• 8

Continues on next page

Product manual - IRB 6640 Foundry Prime 477

3HAC040586-001 Revision: N

7 Reference information

7.8 Dismounting and mounting tool 3HAC028920-001

Continued

ABB IRB 6640 Foundry Prime - Page 477