ABB REB650 - Inverter Function Block INVERTER

Settings
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).
11.3.1.3 Inverter function block INVERTER
Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Inverter function block INVERTER - -
Function block
INVERTER
INPUT OUT
IEC09000287-1-en.vsd
IEC09000287 V1 EN
Figure 82: INVERTER function block
Signals
Table 141: INVERTER Input signals
Name
Type Default Description
INPUT BOOLEAN 0 Input signal
Table 142: INVERTER Output signals
Name
Type Description
OUT BOOLEAN Output signal
Settings
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).
11.3.1.4 PULSETIMER function block
Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
PULSETIMER function block PULSETIMER - -
Section 11 1MRK 505 277-UUS C
Logic
196
Technical Manual