ABB REB650 - Settings

Table 218: A1RADR Input signals
Name Type Default Description
GRPINPUT1 GROUP
SIGNAL
- Group signal for input 1
GRPINPUT2 GROUP
SIGNAL
- Group signal for input 2
GRPINPUT3 GROUP
SIGNAL
- Group signal for input 3
GRPINPUT4 GROUP
SIGNAL
- Group signal for input 4
GRPINPUT5 GROUP
SIGNAL
- Group signal for input 5
GRPINPUT6 GROUP
SIGNAL
- Group signal for input 6
GRPINPUT7 GROUP
SIGNAL
- Group signal for input 7
GRPINPUT8 GROUP
SIGNAL
- Group signal for input 8
GRPINPUT9 GROUP
SIGNAL
- Group signal for input 9
GRPINPUT10 GROUP
SIGNAL
- Group signal for input 10
12.3.3.4 Settings
A1RADR - A3RADR Settings
Setting tables for A1RADR, A2RADR and A3RADR are similar except for channel
numbers.
• A1RADR, channel01 - channel10
• A2RADR, channel11 - channel20
• A3RADR, channel21 - channel30
Table 219: A1RADR Non group settings (basic)
Name
Values (Range) Unit Step Default Description
Operation01 Disabled
Enabled
- - Disabled Operation On/Off
Operation02 Disabled
Enabled
- - Disabled Operation On/Off
Operation03 Disabled
Enabled
- - Disabled Operation On/Off
Operation04 Disabled
Enabled
- - Disabled Operation On/Off
Table continues on next page
Section 12 1MRK 505 277-UUS C
Monitoring
258
Technical Manual