ABB REB650 - Timer Function Block TIMERSET

Signals
Table 151: LOOPDELAY Input signals
Name Type Default Description
INPUT BOOLEAN 0 Input signal
Table 152: LOOPDELAY Output signals
Name Type Description
OUT BOOLEAN Output signal, signal is delayed one execution cycle
Settings
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).
11.3.1.8 Timer function block TIMERSET
Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Timer function block TIMERSET - -
Functionality
The function block TIMERSET has pick-up and drop-out delayed outputs related to
the input signal. The timer has a settable time delay (t).
On
Off
t
tdelay
tdelay
en08000289-2-en.vsd
Input
IEC08000289 V1 EN
Figure 87: TIMERSET Status diagram
Section 11 1MRK 505 277-UUS C
Logic
200
Technical Manual