ABB REB650 - Communication Interfaces and Protocols

Pin Description
7 RS485 RXTERM
8 RS485 TX-
9 RS485 GND
10 RS485 GND
11 IRIG-B -
12 IRIG-B +
13 GNDC
14 GND
16.4.5 Communication interfaces and protocols
Table 380: Supported station communication interfaces and protocols
Protocol Ethernet Serial
100BASE-FX LC Glass fibre (ST connector) EIA-485
IEC 61850–8–1 ● - -
DNP3 ● ● ●
IEC 60870-5-103 - ● ●
● = Supported
16.4.6 Recommended industrial Ethernet switches
ABB recommends three third-party industrial Ethernet switches.
• RuggedCom RS900
• RuggedCom RS1600
• RuggedCom RSG2100
16.5 Connection diagrams
The 6U casing is not included in this release of the 650 series.
1MRK 505 277-UUS C Section 16
IED physical connections
429
Technical Manual