ABB REB650 - Control and Monitoring Functions

2.3 Control and monitoring functions
IEC 61850/Function
block name
ANSI Function description Busbar
REB650
REB650 (A03A) HiZ/3Ph
Control
QCBAY Bay control 1 1
LOCREM Handling of LR-switch positions 1 1
LOCREMCTRL LHMI control of Permitted Source To Operate (PSTO) 1 1
CBC3 Circuit breaker for 3CB 1 1
SLGGIO Logic Rotating Switch for function selection and LHMI
presentation
15 15
VSGGIO Selector mini switch extension 20 20
DPGGIO IEC 61850 generic communication I/O functions double point 16 16
SPC8GGIO Single point generic control 8 signals 5 5
AUTOBITS AutomationBits, command function for DNP3.0 3 3
I103CMD Function commands for IEC60870-5-103 1 1
I103IEDCMD IED commands for IEC60870-5-103 1 1
I103USRCMD Function commands user defined for IEC60870-5-103 4 4
I103GENCMD Function commands generic for IEC60870-5-103 50 50
I103POSCMD IED commands with position and select for IEC60870-5-103 50 50
Secondary system supervision
SDDRFUF Fuse failure supervision 0–2 2
TCSSCBR Breaker close/trip circuit monitoring 3 3
Logic
SMPPTRC 94 Tripping logic, common 3–phase output 1–6 6
TMAGGIO Trip matrix logic 12 12
OR Configurable logic blocks, OR gate 283 283
INVERTER Configurable logic blocks, Inverter gate 140 140
PULSETIMER Configurable logic blocks, Pulse timer 40 40
GATE Configurable logic blocks, Controllable gate 40 40
XOR Configurable logic blocks, exclusive OR gate 40 40
LOOPDELAY Configurable logic blocks, loop delay 40 40
TIMERSET Configurable logic blocks, timer function block 40 40
AND Configurable logic blocks, AND gate 280 280
Table continues on next page
Section 2 1MRK 505 277-UUS C
Available functions
30
Technical Manual