ABB REB650 - Pulse Counter PCGGIO

Section 13 Metering
13.1 Pulse counter PCGGIO
13.1.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Pulse counter PCGGIO
S00947 V1 EN
-
13.1.2 Functionality
Pulse counter (PCGGIO) function counts externally generated binary pulses, for
instance pulses coming from an external energy meter, for calculation of energy
consumption values. The pulses are captured by the BIO (binary input/output) module
and then read by the PCGGIO function. A scaled service value is available over the
station bus.
13.1.3 Function block
IEC09000335-2-en.vsd
PCGGIO
BLOCK
READ_VAL
BI_PULSE*
RS_CNT
INVALID
RESTART
BLOCKED
NEW_VAL
SCAL_VAL
IEC09000335 V2 EN
Figure 148: PCGGIO function block
1MRK 505 277-UUS C Section 13
Metering
345
Technical Manual