ABB REB650 - Loop Delay Function Block LOOPDELAY

Function block
XOR
INPUT1
INPUT2
OUT
NOUT
IEC09000292-1-en.vsd
IEC09000292 V1 EN
Figure 85: XOR function block
Signals
Table 149: XOR Input signals
Name Type Default Description
INPUT1 BOOLEAN 0 Input signal 1
INPUT2 BOOLEAN 0 Input signal 2
Table 150: XOR Output signals
Name Type Description
OUT BOOLEAN Output signal
NOUT BOOLEAN Inverted output signal
Settings
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).
11.3.1.7 Loop delay function block LOOPDELAY
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Logic loop delay function block LOOPDELAY - -
The Logic loop delay function block (LOOPDELAY) function is used to delay the
output signal one execution cycle.
Function block
LOOPDELAY
INPUT OUT
IEC09000296-1-en.vsd
IEC09000296 V1 EN
Figure 86: LOOPDELAY function block
1MRK 505 277-UUS C Section 11
Logic
199
Technical Manual