ABB REB650 - Settings

12.19.4 Settings
Table 272: I103MEASUSR Non group settings (basic)
Name Values (Range) Unit Step Default Description
FunctionType 1 - 255 - 1 25 Function type (1-255)
InfNo 1 - 255 - 1 1 Information number for measurands (1-255)
MaxMeasur1 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input 1
MaxMeasur2 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input 2
MaxMeasur3 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input 3
MaxMeasur4 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input 4
MaxMeasur5 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input 5
MaxMeasur6 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input 6
MaxMeasur7 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input 7
MaxMeasur8 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input 8
MaxMeasur9 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input 9
12.20 Function status auto-recloser for IEC 60870-5-103
I103AR
12.20.1 Functionality
I103AR is a function block with defined functions for autorecloser indications in
monitor direction. This block includes the FunctionType parameter, and the
information number parameter is defined for each output signal.
Section 12 1MRK 505 277-UUS C
Monitoring
336
Technical Manual