EasyManua.ls Logo

ABB REB650 - Section 18 IED and Functionality Tests

ABB REB650
504 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 18 IED and functionality tests
18.1 Electromagnetic compatibility tests
Table 399: Electromagnetic compatibility tests
Description Type test value Reference
100 kHz and 1 MHz burst
disturbance test
IEC 61000-4-18, level 3
IEC 60255-22-1
ANSI C37.90.1-2002
Common mode 2.5 kV
Differential mode 2.5 kV
Electrostatic discharge test IEC 61000-4-2, level 4
IEC 60255-22-2
ANSI C37.90.3-2001
Contact discharge 8 kV
Air discharge 15 kV
Radio frequency interference
tests
Conducted, common mode 10 V (emf), f=150 kHz...80 MHz IEC 61000-4-6 , level 3
IEC 60255-22-6
Radiated, amplitude-
modulated
20 V/m (rms), f=80...1000 MHz
and f=1.4...2.7 GHz
IEC 61000-4-3, level 3
IEC 60255-22-3
ANSI C37.90.2-2004
Fast transient disturbance tests IEC 61000-4-4
IEC 60255-22-4, class A
ANSI C37.90.1-2002
Communication ports 4 kV
Other ports 4 kV
Surge immunity test IEC 61000-4-5, level 3/2
IEC 60255-22-5
Communication 1 kV line-to-ground
Other ports 2 kV line-to-ground, 1 kV line-to-
line
Power frequency (50 Hz)
magnetic field
IEC 61000-4-8, level 5
Table continues on next page
1MRK 505 277-UUS C Section 18
IED and functionality tests
455
Technical Manual

Table of Contents

Other manuals for ABB REB650

Related product manuals