ABB REB650 - Page 272

Name Values (Range) Unit Step Default Description
OverTrigOp35 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 35
(on) or not (off)
OverTrigLe35 0 - 5000 % 1 200 Over trigger level for analog channel 35 in %
of signal
NomValue36 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 36
UnderTrigOp36 Disabled
Enabled
- - Disabled Use under level trigger for analog channel 36
(on) or not (off)
UnderTrigLe36 0 - 200 % 1 50 Under trigger level for analog channel 36 in %
of signal
OverTrigOp36 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 36
(on) or not (off)
OverTrigLe36 0 - 5000 % 1 200 Over trigger level for analog channel 36 in %
of signal
NomValue37 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 37
UnderTrigOp37 Disabled
Enabled
- - Disabled Use under level trigger for analog channel 37
(on) or not (off)
UnderTrigLe37 0 - 200 % 1 50 Under trigger level for analog channel 37 in %
of signal
OverTrigOp37 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 37
(on) or not (off)
OverTrigLe37 0 - 5000 % 1 200 Over trigger level for analog channel 37 in %
of signal
NomValue38 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 38
UnderTrigOp38 Disabled
Enabled
- - Disabled Use under level trigger for analog channel 38
(on) or not (off)
UnderTrigLe38 0 - 200 % 1 50 Under trigger level for analog channel 38 in %
of signal
OverTrigOp38 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 38
(on) or not (off)
OverTrigLe38 0 - 5000 % 1 200 Over trigger level for analog channel 38 in %
of signal
NomValue39 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 39
UnderTrigOp39 Disabled
Enabled
- - Disabled Use under level trigger for analog channel 39
(on) or not (off)
UnderTrigLe39 0 - 200 % 1 50 Under trigger level for analog channel 39 in %
of signal
OverTrigOp39 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 39
(on) or not (off)
OverTrigLe39 0 - 5000 % 1 200 Over trigger level for analog channel 39 in %
of signal
NomValue40 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 40
UnderTrigOp40 Disabled
Enabled
- - Disabled Use under level trigger for analog channel 40
(on) or not (off)
Table continues on next page
Section 12 1MRK 505 277-UUS C
Monitoring
266
Technical Manual