ABB REB650 - Page 279

Name Values (Range) Unit Step Default Description
TrigLevel05 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0) slope
for binary input 5
IndicationMa05 Hide
Show
- - Hide Indication mask for binary channel 5
TrigLevel06 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0) slope
for binary input 6
IndicationMa06 Hide
Show
- - Hide Indication mask for binary channel 6
TrigLevel07 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0) slope
for binary input 7
IndicationMa07 Hide
Show
- - Hide Indication mask for binary channel 7
TrigLevel08 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0) slope
for binary input 8
IndicationMa08 Hide
Show
- - Hide Indication mask for binary channel 8
TrigLevel09 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0) slope
for binary input 9
IndicationMa09 Hide
Show
- - Hide Indication mask for binary channel 9
TrigLevel10 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0) slope
for binary input 10
IndicationMa10 Hide
Show
- - Hide Indication mask for binary channel 10
TrigLevel11 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0) slope
for binary input 11
IndicationMa11 Hide
Show
- - Hide Indication mask for binary channel 11
TrigLevel12 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0) slope
for binary input 12
IndicationMa12 Hide
Show
- - Hide Indication mask for binary channel 12
TrigLevel13 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0) slope
for binary input 13
IndicationMa13 Hide
Show
- - Hide Indication mask for binary channel 13
TrigLevel14 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0) slope
for binary input 14
IndicationMa14 Hide
Show
- - Hide Indication mask for binary channel 14
TrigLevel15 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0) slope
for binary input 15
Table continues on next page
1MRK 505 277-UUS C Section 12
Monitoring
273
Technical Manual