Abbott CELL-DYN 3200 - Page 280

5-128
CELL-DYN
®
3200 System Operator’s Manual
9140181K—July 2002
Operating Instructions
Using The Data Log
Section 5
Previous Specimen
The [PREVIOUS SPECIMEN] key is used to display the results for the sequence
number preceding the one currently displayed without returning to the main DATA
LOGscreen.
Next Specimen
The [NEXT SPECIMEN] key is used to display the results for the sequence number
following the one currently displayed without returning to the main DATA LOG
screen.
Edit Specimen
The [EDIT SPECIMEN] key is used to edit patient demographic information for the
selected record. It may also be used to edit and display the results with a Parameter
or Patient Limit Set different from the one currently displayed. The following soft
key labels are displayed when the [EDIT SPECIMEN] key is pressed:
CONFIRM
CANCEL
These keys are used to [CONFIRM] or [CANCEL] the edits. The Bulletin line displays
the message PRESS CONFIRM TO SAVE CHANGES OR CANCEL TO
CANCEL CHANGES. When the [CONFIRM] key is pressed, the edited record is
displayed.
Customize Report
The [CUSTOMIZE REPORT] key is used to customize the RUNscreen display, header
and printout as described in the Set Up Instructions section of this chapter.
Transmit Specimen
The [TRANSMIT SPECIMEN] key is used to transmit the displayed report to a
Laboratory Information System or on-line computer. If auto-transmit extended
histograms or scatter plots is selected, the transmit specimen key will transmit the
extended data.
Print Ticket
The [PRINT TICKET] key is used to print a ticket (in the currently selected format)
for the displayed record.
Print Report
The [PRINT REPORT] key is used to print a graphics report (in the currently selected
format) for the displayed record.
NOTE: If color printing has been selected (refer to the Set Up Instructions), the
key label changes to [COLOR PRINT].
Return
The [RETURN] key is used to return to the mainDATA LOGscreen.