Abov MC96F8204 Series User Manual

83
MC96F8204
ABOV Semiconductor Co., Ltd.
11 Peripheral Hardware
11.1 Clock Generator
11.1.1 Overview
As shown in Figure 11.1, the clock generator produces the basic clock pulses which provide the system clock to be
supplied to the CPU and the peripheral hardware. It contains main/sub-frequency clock oscillator. The main/sub clock
operation can be easily obtained by attaching a crystal between the XIN/SXIN and XOUT/SXOUT pin, respectively.
The main/sub clock can be also obtained from the external oscillator. In this case, it is necessary to put the external
clock signal into the XIN/SXIN pin and open the XOUT/SXOUT pin. The default system clock is 1MHz INT-RC
Oscillator and the default division rate is eight. In order to stabilize system internally, it is used 1MHz INT-RC oscillator
on POR.
− Calibrated Internal RC Oscillator (8 MHz)
• INT-RC OSC/1 (8 MHz)
• INT-RC OSC/2 (4 MHz)
• INT-RC OSC/4 (2 MHz)
• INT-RC OSC/8 (1 MHz, Default system clock)
• INT-RC OSC/16 (0.5 MHz)
• INT-RC LF (200kHz)
− Main Crystal Oscillator (0.4~12 MHz)
− Sub Crystal Oscillator (32.768kHz)
− Internal WDTRC Oscillator (5 kHz)

Abov MC96F8204 Series Specifications

General

Brand	Abov
Model	MC96F8204 Series
Category	Microcontrollers
Language	English