ADCMT 6244 User Manual

6243/44 DC Voltage Current Source/Monitor Operation Manual
6.2 Differences Between the TR6143 Mode and the Original Mode
6-4
Measurement
data buffer
Mode Burst, Normal, or OFF ON/OFF
Storing 5000 fixed data (Data is not overwrit-
ten)
5000 FIFO data (Data is not overwrit-
ten)
Read out Data can be read out using RECALL. Data cannot be read out using
RECALL.
Operation
when the
memory is full
Burst : DC and pulse source
; The HOLD status is set.
: The sweep starts
; The STOP status is set.
Normal: Data storage stops.
DC source ; Pulse and sweep source
starts.
; Source and measurement
pauses.
GPIB Command Refer to, “5.2.10 GPIB Code List.” Refer to, “6.4.1 TR6143 Mode GPIB
Code List.”
Output the
measurement
data buffer
data.
Read out using RN1 Read out using ENTER
The binary data output mode is unavail-
able.
The binary data output mode is avail-
able.
Status Refer to, “5.2.8 Status Byte.” Refer to, “6.4.3 Status Byte in TR6143
Mode.”
TIME The minimum
resolution of
the major
delay period
and pulse
width
0.01 ms 1 ms
Table 6-1 Differences Between the TR6143 Mode and the Original Mode (2 of 2)
Function Original mode TR6143 mode

ADCMT 6244 Specifications

General

Brand	ADCMT
Model	6244
Category	Measuring Instruments
Language	English