7352 Series Digital Multimeter Operation Manual
6.6.3 ADC Command Reference
6-30
System Error record
reading
ERR? Reads the error details.
Reply: ddd,"xxxxxxxxxx"
• Up to 20 error queues can be stored. The error is output
according to the FIFO system.
• If more than 20 errors occur, the last error is replaced
with -350, “Queue overflow”. Any errors after this are
not saved.
• If no error occurs, +000, “No error” is returned.
–
Item
Command
Description
Va l i d
command
for the 2nd
display
setting
Initial
value
R6452
Error character strings
(Up to 80 characters)
Error code
To Next Page
Loading...
