R3131 Spectrum Analyzer Operation Manual
3.3.22 SAVE Key (Saving Data)
3.3.22 SAVE Key (Saving Data)
This section describes the menu displayed when the SHIFT key and the RECALL (SAVE) key are
pressed.
Save
Save Item
Setup ON/OFF
Trace ON/OFF
Ant Corr ON/OFF
Norm Con- ON/OFF
Saves the data selected by Save Item to the file selected in the file
list.
Displays the Save Item menu.
Tog gl es the SAVE setup condition function on or off.
ON: Saves the setup conditions.
OFF: Does not save the setup conditions.
Tog gl es the SAVE trace data function on or off.
ON: Saves the trace data.
OFF: Does not save the trace data.
Tog gle s the SAVE correction data function on or off.
ON: Saves the correction data.
OFF: Does not save the correction data.
Tog gl es the save function (of normalization calibration data) on
or off (this function is available only when equipped with Option
74).
ON: Saves normalization calibration data.
OFF: Does not save normalization calibration data.
Trc Lvl ON/OFF Togg les the trace data SAVE function on or off.
ON: Stores the trace data level (at the present level).
OFF: Does not store the trace data level.
Protect Enables the write protect for the file selected in the file list.
Delete Removes the selected file from the file list.
Device RAM/FD Selects the location used to store the data.
RAM: Stores the data in internal memory.
FD: Stores the data on the floppy disk in the disk drive.
3-43
To Next Page
Loading...
Need help?
General
