ADVANTEST R3131 Series

R3131 Spectrum Analyzer Operation Manual
Parameter
Default Setting
Copy destination setting
Printer
Printer type
PCL
Screen output mode
GRAY SCALE MODE
GPIB address
8
Baud rate
9600bps
Data length
8
Stop bit length
1
Parity bit type
None
XON/XOFF signal output
ON
Bit map file number
1
Date display
ON
Date display mode
Month/day/time
3.4.4 Defaults Configuration Values
3.4.4 Defaults Configuration Values
These are the default settings used when the Defaults Config softkey is pressed.
Table 3-5 Values for Default Config
3-56*