Equipment 19
4510001 REV B - 220620
Brushdown Assembly
Part Number 4500262R and 4500262L
A Brushdown Assembly is included as a standard part of LX-150 Shrink Sleeve Label
Applicator. The Brushdown Assembly is mounted to the Conveyor immediately downstream
from the LX-150. After the bottle has passed through the LX-150, the tendrils of the
Brushdown Assembly brush softly down over the sides of the bottle to ensure that the
bottom edge of the label is flush with the Conveyor surface (or flush with the Auxiliary Belts /
Bottle Holding Devices, if used) before the bottle enters the Heat Shrink Tunnel.
Brushdown Assembly
AFM-4510001-00033-01
AFM-4510001-00030-01
To Next Page