Maintenance 149
4510001 REV B - 220620
General Cleaning
The LX-150 and UR-1 may periodically need to be cleaned.
ATTENTION: The LX-150 and UR-1 are not “wash-down” rated and cannot be
sprayed down with water or chemicals. Any attempt to do so can damage the
machine, may cause problems with functionality, and will void the warranty.
Items Needed to Generally Clean the LX-150 and UR-1:
• Non-abrasive, Lint-free Wipes (Part Number 2005470)
• Cloth or Paper Towels
• Standard cleaners for use on metal and glass
• Compressed Air
To Generally Clean the LX-150 and UR-1:
Before performing any cleaning, power off the LX-150 (see “Powering the System Off” on page
145) and unplug it from the power source.
WARNING: Failure to power off the system and unplug it from its power source
before cleaning can result in severe electric shock or death.
Cleaning the Outside of the LX-150 and UR-1:
Spray the cleaner onto the Cloth/Paper Towels.
Wipe the outside of the LX-150 and UR-1 thoroughly, being careful not to get any in
the various connections.
Use a separate Cloth/Paper Towel to wipe away any cleaner residue.
Cleaning the Inside of the LX-150:
ATTENTION: Never spray water, cleaner, or other liquids directly on any parts.
Spray the cleaner onto one or more Non-abrasive, Lint-free Wipes.
Wipe the surfaces inside the LX-150 thoroughly.
Use separate Non-abrasive, Lint-free Wipes to wipe away any cleaner residue.
To Next Page