AFM LX-150 - Cutter Assembly Sizes

42 Introduction
4510001 REV B – 220620
Cutter Assembly Sizes
Three standard Cutter Assembly sizes are available for the LX-150, based on the size of the
bottle being labeled and the Mandrel being used. Custom-sized Cutter Assemblies tailored to
specific needs can also be built by AFM upon request.
Cutter Size Part Number
Approximate Bottle
Diameter
Label Lay Flat Width
Small (4 blade)
4500462
Ø
0.98” – 2.76”
(
Ø 25 – 70 mm)
Ø 1.89″ – 4.53″
(
Ø 48 – 115 mm)
Medium (5 blade)
4505152
Ø
1.57” – 4.72”
(
Ø 40 – 120 mm)
Ø 3.07” – 6.89”
(
Ø 78 – 175 mm)
Large (6 blade)
4505153
Ø
3.54″ – 5.91″
(
Ø 90 – 150 mm)
Ø 5.51″ – 9.45″
(
Ø 140 – 240 mm)