Contents
11
Entering Settings 76
Aligning Transport Arm/Gripper 79
Tracking Autosampler History / EMF limits 79
Resetting the Autosampler 80
Troubleshooting the Autosampler 80
6 Using the Manual Injection Valve
Operational details for the Agilent 1100 Series manual injection
valve 81
About the Injection Valve 82
Making An Injection 82
Completely Filling the Sample Loop 83
Partially Filling the Sample Loop 83
How Much Sample Is Actually Injected? 84
How Much Sample Do I Need? 84
An Alternative Way to Fill The Loop 85
7 Using the Detectors
Operational details for the Agilent 1100 Series variable wavelength,
multiple wavelength, refractive index, fluorescence light, and diode ar-
ray detectors 87
Turning the Lamp On and Off 88
Entering Settings 88
Resetting the Baseline 90
Configuring the Detector 90
Troubleshooting the Detector 91
Tracking Detector History 91
Resetting the Detector 92
To Next Page
Loading...
Need help?
General
