Agilent Technologies 1200 Infinity Series - Page 106

106 Agilent 1200 Infinity Series DAD User Manual
5 Optimizing the Detector
Optimizing the Detector Regarding to the System
Tabl e 9 Peak Width — Response Time — Data Rate
Peak width at half
height [min]
1
1
Values in the User Interface may be rounded.
Response
[s]
Signal data
rate [Hz]
Scan data rate
[HZ]
≤126 pts/scan
Scan data rate
[HZ]
≤251 pts/scan
Scan data rate
[HZ]
≤501 pts/scan
Scan data rate
[HZ]
>501 pts/scan
< 0.0016 0.016
160
2
2
G4212A only
160
2
80 40 20
> 0.0016 0.03
160
2
160
2
80 40 20
> 0.003 0.062 80 80 80 80 40
> 0.0060.124040404040
> 0.0120.252020202020
> 0.025 0.5 10 10 10 10 10
> 0.05 1.0 5 5 5 5 5
> 0.10 2.0 2.5 2.5 2.5 2.5 2.5
> 0.20 4.0 1.25 1.25 1.25 1.25 1.25
> 0.40 8.0 0.625 0.62 0.625 0.625 0.625
> 0.85 16.0 0.3125 0.31 0.3125 0.3125 0.3125
NOTE
The maximum spectra scan rate depends on the data points per scan, see Ta b l e 9 on
page 106. Running at 160 Hz, the spectra scan data rate is reduced automatically if the
spectra scan data rate is more than 251 points/scan.