Agilent Technologies 1200 Infinity Series - Agilent Chemstation Setup

254 Agilent 1200 Infinity Series DAD User Manual
13 LAN Configuration
PC and Agilent ChemStation Setup
Agilent ChemStation Setup
This procedure describes the Agilent ChemStation B.04.02 setup for the 1290
Infinity system using the 1290 Infinity DAD (G4212A) as the interfacing
module. The setup works in the same way for all other systems.
1 Open the ChemStation Configuration Editor.
2 Select from the menu Configure - Instruments.
3 Select Modular 3D LC System.
4 Give the Instrument a name.
NOTE
The LAN must be connected to detector due to high data load on communication to Control
Software.