Agilent Technologies 1200 Infinity Series - Heater Power at Limit

Agilent 1200 Infinity Series DAD User Manual 131
Error Information
7
Detector Error Messages
Heater Power At Limit
Error ID: 1074
The available power of the heater reached either the upper or lower limit. This
event is sent only once per run. The parameter determines which limit has
been hit:
0 means upper power limit hit (excessive ambient temperature drop).
1 means lower power limit hit (excessive ambient temperature increase).
Probable cause Suggested actions
1 Excessive ambient temperature change.
Wait until temperature control equilibrates.