Agilent Technologies 1200 Infinity Series User Manual

Agilent 1200 Infinity Series DAD User Manual 17
Introduction
1
Bio-inert Materials
Bio-inert Materials
For the Agilent 1260 Infinity Bio-inert LC system, Agilent Technologies uses
highest quality materials in the flow path (also referred to as wetted parts),
which are widely accepted by life scientists, as they are known for optimum
inertness to biological samples and ensure best compatibility with common
samples and solvents over a wide pH range. Explicitly, the complete flow path
is free of stainless steel and free of other alloys containing metals such as iron,
nickel, cobalt, chromium, molybdenum or copper, which can interfere with
biological samples. The flow downstream of the sample introduction contains
no metals whatsoever.
Max-Light Cartridge Cell Bio-inert ( 60 mm, V(σ) 4.0 μL) (G5615-60017) and
Max-Light Cartridge Cell Bio-inert ( 10 mm, V(σ) 1.0 μL) (G5615-60018) offer
highest sensitivity for bio-inert reverse phase applications. Please note that at
low salt SEC or ion exchange chromatography potentially peak tailing might
occur, and therefore for these applications the universal Bio-inert DAD
(G1315C or D) or MWD (G1365C or D) is recommended.
Tabl e 1 Bio-inert materials used in Agilent 1260 Infinity Systems
Module Materials
Agilent 1260 Infinity Bio-inert Quaternary Pump
(G5611A)
Titanium, gold, platinum-iridium,
ceramic, ruby, PTFE, PEEK
Agilent 1260 Infinity Bio-inert High-Performance Autosampler
(G5667A)
Upstream of sample introduction:
• Titanium, gold, PTFE, PEEK,
ceramic
Downstream of sample
introduction:
• PEEK, ceramic
Agilent 1260 Infinity Bio-inert Manual Injector
(G5628A)
PEEK, ceramic
Agilent 1260 Infinity Bio-inert Analytical Fraction Collector
(G5664A)
PEEK, ceramic, PTFE

Agilent Technologies 1200 Infinity Series Specifications

General

Brand	Agilent Technologies
Model	1200 Infinity Series
Category	Security Sensors
Language	English