Agilent Technologies 1200 Infinity Series User Manual

Agilent 1200 Infinity Series DAD User Manual 185
Maintenance
9
Information from Module’s Assemblies
Information from Module’s Assemblies
Lamp and Flow Cell RFID Tag
The detector is equipped with a UV lamp and flow cell identification system
using RFID (radio frequency identification) tags attached to the assemblies
and RFID tag readers at the optical unit. The table below lists all parameters
stored in the RFID tag.
Serial Number and Firmware Revision
The user interface provides module specific information that is stored in the
main board. These are for example the serial number, firmware revision.
Tabl e 1 4 RFID Tag Data
Lamp information Flow cell information
• product number • product number
• serial number • serial number
• production date • production date
• accumulated UV on time (in hours) • nominal path length of the cell (in
mm)
• actual UV lamp on time (in hours)
• cell volume (
σ) in µL
• number of ignitions • maximum pressure (in bar)
• date of last intensity test • date of last cell test
NOTE
The pressure value is always displayed in bar, even if the user interface uses other units,
e.g. PSI.

Agilent Technologies 1200 Infinity Series Specifications

General

Brand	Agilent Technologies
Model	1200 Infinity Series
Category	Security Sensors
Language	English