Agilent Technologies 1200 Infinity Series User Manual

24 Agilent 1200 Infinity Series DAD User Manual
2 Site Requirements and Specifications
Performance Specifications
Performance Specifications
Specifications
Performance Specifications G4212A
Tabl e 3 Performance Specifications G4212A
Type Specification Comments
Detection type 1024-element photodiode array
Light source Deuterium lamp Equipped with RFID tag that holds
lamp typical information.
Wavelength range 190 – 640 nm
Short term noise
(ASTM) Single and
Multi-Wavelength
< ± 3 × 10
-6
AU at 230 nm/4 nm, with 10 mm Max-Light
cartridge cell
Typically < ± 0.6 × 10
-6
AU/cm at 230 nm/4 nm, with 60 mm
Max-Light cartridge cell
see "Specification Conditions"
below
Drift
< 0.5 × 10
-3
AU/hr at 230 nm
see "Specification Conditions"
below
Linear absorbance
range
> 2.0 AU (5 %) at 265 nm see "Specification Conditions"
below
Wavelength
accuracy
± 1 nm After recalibration with
deuterium lines
Wavelength
bunching
2–400nm Programmable in steps of 1 nm
Slit width 1, 2, 4, 8 nm Programmable slit
Diode width ~ 0.5 nm
Signal data rate up to 160 Hz
Spectra Data rate up to 160 Hz

Agilent Technologies 1200 Infinity Series Specifications

General

Brand	Agilent Technologies
Model	1200 Infinity Series
Category	Security Sensors
Language	English