Agilent Technologies 1200 Infinity Series User Manual

18 Agilent 1200 Infinity Series DAD User Manual
1 Introduction
Bio-inert Materials
Bio-inert Flow Cells:
Standard flow cell bio-inert, 10 mm, 13 µL, 120 bar ( 12 MPa)
for MWD/DAD, includes Capillary Kit Flow Cells BIO
(p/n G5615-68755) (G5615-60022)
(for Agilent 1260 Infinity Diode Array Detectors DAD
G1315C/D)
PEEK, ceramic, sapphire, PTFE
Max-Light Cartridge Cell Bio-inert ( 10 mm, V(σ) 1.0 µL)
(G5615-60018) and
Max-Light Cartridge Cell Bio-inert ( 60 mm, V(σ) 4.0 µL)
(G5615-60017)
(for Agilent 1200 Infinity Series Diode Array Detectors DAD
G4212A/B)
PEEK, fused silica
Bio-inert flow cell, 8 µL, 20 bar (pH 1–12) includes Capillary Kit
Flow Cells BIO (p/n G5615-68755) (G5615-60005)
(for Agilent 1260 Infinity Fluorescence Detector FLD G1321B)
PEEK, fused silica, PTFE
Bio-inert heat-exchanger G5616-60050
(for Agilent 1290 Infinity Thermostatted Column Compartment
G1316C)
PEEK (steel-cladded)
Bio-inert Valve heads G4235A, G5631A, G5639A: PEEK,
ceramic (Al
2
O
3
based)
Bio-inert Connection capillaries Upstream of sample introduction:
• Titanium
Downstream of sample
introduction:
• Agilent uses
stainless-steel-cladded PEEK
capillaries, which keep the flow
path free of steel and provide
pressure stability to more than
600 bar.
Tabl e 1 Bio-inert materials used in Agilent 1260 Infinity Systems
Module Materials
NOTE
To ensure optimum bio-compatibility of your Agilent 1260 Infinity Bio-inert LC system, do
not include non-inert standard modules or parts to the flow path. Do not use any parts that
are not labeled as Agilent “Bio-inert”. For solvent compatibility of these materials, see
“Solvent information for parts of the 1260 Infinity Bio-inert LC system” on page 73.

Agilent Technologies 1200 Infinity Series Specifications

General

Brand	Agilent Technologies
Model	1200 Infinity Series
Category	Security Sensors
Language	English