Agilent Technologies 1200 Infinity Series User Manual

244 Agilent 1200 Infinity Series DAD User Manual
13 LAN Configuration
Automatic Configuration with BootP
3 Press Edit BootP Addresses… to edit the Tab File.
Figure 68 Edit BootP Adresses screen
4 In the Edit BootP Addresses... screen press Add... to create a new entry or
select an existing line from the table and press Modify... or Delete to change
the IP address, comment, subnet mask, for example, in the Tab File.
If you change the IP address, it will be necessary to power cycle the
instrument for the changes to take effect.
5 Leave Edit BootP Addresses... by pressing Close.
6 Exit BootP Settings by pressing OK.
Restarting the Agilent BootP Service
1 In the Windows control panel, select Administrative Tools > Services. The
Services screen appears, see Figure 67 on page 243.
2 Right-click Agilent BootP Service and select Start.
3 Close the Services and Administrative Tools screens.

Agilent Technologies 1200 Infinity Series Specifications

General

Brand	Agilent Technologies
Model	1200 Infinity Series
Category	Security Sensors
Language	English