CALCulate[1|2|3|4]:LIMit:LOWer:CLEar[:IMMediate] command
Deletes the lower limit line from the specified display.
Command Syntax: CALCulate[1|2|3|4]:LIMit:LOWer:CLEar[:IMMediate]
Example Statements: OUTPUT 711;":CALC4:LIMIT:LOW:CLE"
OUTPUT 711;"calculate:lim:lower:cle:imm"
Attribute Summary: Option: not applicable
Synchronization Required: no
Preset State: not applicable
SCPI Compliance: instrument-specific
Description:
To delete a lower limit line, send CALC:LIM:LOW:CLE. To delete an upper limit, send
CALC:LIM:UPP:CLE.
You can delete part of a limit line if it consists of segments. See the CALC:LIM:LOW:SEGM:CLE
command for information about deleting a segment of the lower limit line.
CALCulate
6-35
To Next Page
Loading...
