Agilent Technologies 35670A Manual&Nbsp;

CALCulate[1|2|3|4]:MARKer:DTABle:X:INSert command/query
Inserts an entry into the data table.
Command Syntax: CALCulate[1|2|3|4]:MARKer:DTABle:X:INSert {<number>
[<unit>]}|<bound>
<number> ::= a real number (NRf data)
limits: -9.9e37:9.9e37
<unit> ::= [HZ|S|ORD|COUNT|AVG|V|VPK|RPM|EU|REV]
<bound> ::= MAX|MIN
Example Statements: OUTPUT 711;":CALC3:MARK:DTABLE:X:INSERT 2.0516e+37"
OUTPUT 711;"calc:mark:dtable:x:insert 6.26239e+36"
Query Syntax: CALCulate[1|2|3|4]:MARKer:DTABle:X:INSert?
Return Format: Real
Attribute Summary: Option: not applicable
Synchronization Required: no
Preset State: not applicable
SCPI Compliance: instrument-specific
Description:
If you want to insert entries in a specific order or if you are modifying an existing data table, use the
CALC:MARKER:DTAB:X:SELECT[:POINT] command. The X value is inserted
before the
selected entry.
CALCulate[1|2|3|4] specifies the data table. Send CALC1 to specify the data table appearing in trace box
A, CALC2 to specify B, CALC3 to specify C, and CALC4 to specify D. If you do not send the optional
specifier, the command defaults to the data table appearing in trace box A.
To display the data table, use the DISPlay[:WINDow[1|2|3|4]]:DTABle[:STATe] command.
CALCulate
6-63

Agilent Technologies 35670A Specifications

General

Brand	Agilent Technologies
Model	35670A
Category	Measuring Instruments
Language	English