*OPT? query
Returns a string that identifies the analyzer’s option configuration.
Query Syntax: *OPT?
Example Statements: OUTPUT 711;"*opt?"
OUTPUT 711;"*Opt?"
Return Format: “1D1,1D2,1D3,1D4,1C2,AN2,AY6"
Attribute Summary: Option: not applicable
Synchronization Required: no
Preset State: instrument dependent
SCPI Compliance: confirmed
Description:
The response to this query identifies the analyzer’s option configuration. For example, if your analyzer
has Computed Order Tracking installed, it returns 1D0 to this query. Options are identified by the
following:
1D0 Computed Order Tracking
1D1 Real Time Octave Measurements
1D2 Swept Sine Measurements
1D3 Curve Fit / Synthesis
1D4 Arbitrary Source
1C2 Instrument BASIC
AY6 Add 2 Input Channels
UFF Add 1 MByte Nonvolatile RAM
AN2 Add 4 MBytes Memory
UFC Add 8 MBytes Memory
The query returns a null string (“”"") if special options are not installed in the analyzer.
Common Commands
3-9
To Next Page
Loading...
