Agilent Technologies FieldFox N9913A User Manual

170 FieldFox User’s Guide
How to move the cursor:
 Use the rotary knob to move the cursor along the same row. The cursor will
change rows when it comes to a row end.
 Use the ▲|▼ arrows to move the cursor up and down between rows.
When the selected keyword is complete:
 Press Done to save all keywords and close the Edit Keywords labeler. These
keywords will exist on the FieldFox until changed.
 Press Cancel to close the labeler without saving changes.
Prefixes for Filenames
A prefix is used as a default filename to which characters can be added. The
prefix can be customized, and quickly enabled or disabled. When enabled, the
current prefix is automatically entered as the start of a filename when
performing a Save operation.
How to enable and disable the current Prefix
 Press Save/Recall 9.
 Then More.
 Then Prefix ON OFF The current selection is underlined.
How to edit the current Prefix
 Press Save/Recall 9.
 Then More.
 Then Prefix.
 Then choose from the following:
o Press Select to add the cursor character to the end of the Prefix.
o Press Backspace to erase the last character from the end of the Prefix.
o Press Clear to erase the Prefix.
o The preselected keywords (File, Site, and so forth) can be selected just like a
single character. These keywords can also be edited. See Edit Keywords.
How to move the cursor
 Use the rotary knob to move cursor on the same row.
 Use the ▲|▼ arrows to move the cursor up and down the rows.
When the Prefix is complete
 Press Done to save the Prefix and close the labeler. This Prefix will exist on
the FieldFox until it is changed.
 Press Cancel to close the labeler without saving changes.

Agilent Technologies FieldFox N9913A Specifications

General

Brand	Agilent Technologies
Model	FieldFox N9913A
Category	Measuring Instruments
Language	English