87
User Guide
CHANNEL
In the main MIXER page, pressing CHANNEL (F1) will show the settings for the selected channel.
NOTE:
Enabling the Q-CHANNEL button automatically calls up the MIXER / CHANNEL page of
the selected Channel on the LCD. Then , when disabling Q-CHANNEL, the display returns to the
previous screen.
There are actually multiple Channel pages:
EQ Channel page
Dynamics Channel pages:
Compressor/Expander sub-page
Noise Gate sub-page
Channel Utilities page
There are also several Channel types. The Channel types are:
Input Channel (Mono)
Track Channel (Mono)
FX Return Channel (Stereo)
Aux L/R Input (Stereo)
Group
FX/AUX Master Send
Master Channel
MIDI Controller Channel
The Channel pages only show the parameters available for the type of selected channel.
For instance, only Mono Input or Track Channels have EQ and Dynamics controls.
The main EQ Channel page looks like this:
The main EQ Channel page is designed so that you can use the Q-Channel encoders to set
the main parameters (pan, EQ, sends, etc.) and the Q-Link controls to set the others.
CHANNEL
To Next Page
Loading...
Need help?
General
