138
FX PARAMETERS
User Guide
CHORUS
The common parameters for the chorus effects are:
• Rate1 (0.1Hz - 10.0Hz) Adjusts the speed (rate) of LFO1
• Rate2 (0.1Hz - 10.0Hz) Adjusts the speed (rate) of LFO2
• Fdback (0% - 100%) Adjusts the amount of the chorus effect feedback
• Depth1 (0% - 100%) Adjusts the depth of LFO1
• Depth2 (0% - 100%) Adjusts the depth of LFO2
MONO CHORUS
This is a typical chorus effect with mono-in and mono-out.
You can adjust the pan setting of the effect sound with the additional Pan parameter:
• Pan (-60 - +60)
STEREO CHORUS
This is a stereo chorus effect (mono-in, stereo out).
You can adjust the width and spread of the stereo image with the additional Width parameter:
• Width (0% - 100%)
XOVER CHORUS
This is a variation of the STEREO CHORUS.
The feedback from the Left/Ringht channels is input to the opposite channels.
The parameters are the same.
To Next Page
Loading...
Need help?
General
