182
SETUP MODE
User Guide
DISK
Pressing DISK will show something like this screen:
Here, you can see the list of drives connected to the DPS24, either internal IDE drives or
external SCSI drives.
When the DPS24 is connected to a computer via USB and either akSys TrackView V1.21 or
akSysServer are running, all the valid folder paths are shown in the DPS24 as additional
HOST drives.
However, DISK TOOLS and CLEAN UP functions are not available for HOST drives.
HOST drives are named as "Remote HD" and Free shows the size of the whole volume.
To Next Page
Loading...
Need help?
General
