166
SETUP MODE
User Guide
SETUP MODE
The SETUP page allows you to set certain functions that affect the DPS24 as a whole. Press-
ing SETUP shows this page:
Here, you can set the following functions using Q1-Q6:
SAMPLE RATE Here, you can set the sample rate for the DPS24. The options are 32kHz,
44.1kHz, 48kHz, 88.2kHz and 96kHz
NOTE:
The mix processing, track count and FX are reduced by half when using the high sample rates (88.2kHz or 96kHz).
When a project is loaded and already contains audio, should you attempt to change the sample
rate, you will be prompted:
To Next Page
Loading...
