149
User Guide
To recall the snapshot onto FX channel 4 select FX channel 4 in the FX page then press the
MIX SCENE RECALL button to display the SNAPSHOT RECALL PAGE.
You can see that the default name for an FX snapshot is the name of the FX settings originally
stored. Position the cursor on the snapshot you want to recall and press RECALL (F6) or ENTER.
The FX settings contained in the snapshot saved from FX channel 2 will be recalled onto FX
channel 4.
NOTES REGARDING FX SNAPSHOTS
NOTE 1:
You don't have to launch the snapshot store and recall pages from the FX page to store and
recall FX settings. Once in the Store or Recall page you can always set SNAPSHOT mode using the
SCENE/SNAPSHOT button (F2) and set the Snapshot Type to the desired FX channel using the Q5
knob.
NOTE 2:
To store FX presets from the global library as an automate-able snapshot simply recall the
chosen preset onto an FX channel then store as a snapshot.
Conversely, storing snapshots into the global preset library can be achieved by recalling the snapshot
onto an FX channel then storing the recalled settings as a preset.
NOTE 3:
Edited effects are stored as part of the current Snapshot so that when you subsequently
recall that snapshot, the correct effects assignment and their customised settings are recalled, even if
the edited effect had not been stored as a Custom effect in the FX Library.
FX SNAPSHOTS
To Next Page
Loading...
Need help?
General
