Create new or modify existing DCC terminations
...................................................................................................................................................................................................................................
When to use
Use this procedure to create new or modify existing DCC terminations.
Related information
For related information, please refer to:
• “Concepts” (p. 4-3)
Before you begin
Prior to performing this task, you must have an overview of the current network
topology.
Furthermore, you must:
1. log into the ITM
®
CIT, and
2. connect to the NE.
Required equipment
The following equipment is required to perform this task:
• ITM
®
CIT
Instructions
Complete the following steps to create a new DCC termination or to modify an
existing DCC termination.
...................................................................................................................................................................................................
1
Select Management → Overlay Comms Networks →DCC from the main menu.
Result: The DCC list window is displayed.
...................................................................................................................................................................................................
2
In the DCC list window select the port for which you want to create a new DCC
termination or to modify an existing DCC termination.
Click on
Edit.
Result: The Edit DCC window is displayed.
...................................................................................................................................................................................................
3
In the Edit DCC window either enable or disable DCC termination for the selected port
by selecting the respective radio button.
...................................................................................................................................................................................................
4
In the LAPD Side group box, choose the LAPD Role (either USER-SIDE (default) or
NETWORK-SIDE by selecting the respective radio button.
Management communication setup
...................................................................................................................................................................................................................................
4-34
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
