Delete an existing ASAP
...................................................................................................................................................................................................................................
When to use
This procedure is used to delete a user-created alarm severity assignment profile
(ASAP) that is not currently active. DEFAULT ASAPs cannot be deleted.
Before you begin
Before performing this task, you must have an overview of the network topology.
1. Log into the ITM
®
CIT, and
2. Connect to the NE.
Required equipment
The following equipment is required to perform this task:
• ITM
®
CIT
Procedure
Follow this procedure to delete a user-created alarm severity assignment profile
(ASAP) that is not currently active.
...................................................................................................................................................................................................
1
Select Alarms → ASAP List from the main menu.
Result: The Alarm Severity Assignment Profiles List window is displayed.
...................................................................................................................................................................................................
2
Select the ASAP to be deleted in the ASAP List. Then click on Delete.
Result: A confirmation window appears. Click YES.
The Alarm Severity Assignment Profile is deleted.
E ND OF STEPS
...................................................................................................................................................................................................
Alarm management
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
6-37
To Next Page
Loading...
