Parameters for viewing NE slot information
...................................................................................................................................................................................................................................
Slot
The slot position is given here.
Actual unit
The unit physically present in the selected slot.
Expected unit
The type of unit provisioned in the listed slot is shown.
Slot state
Displays the status of the listed slot. The different slot states are given in the table
below.
Slot State Description
Assigned Slot is assigned.
Unassigned Slot is unassigned.
Auto Slot is provisioned but waiting for unit. Once the provisioned unit
is present, the slot state will automatically change to Assigned.
Selected slot
Indicates the slot selected.
Operation
When assigning units, an operation must be chosen. The choices are detailed in the
following table.
Slot State Description
Assign Assigns the unit to the slot.
Unassign The slot is configured to be empty. The NE will not expect any
unit to be present in this slot.
Auto Automatically assigns the unit to the slot once the NE establishes
the presence of a unit of the correct type. Until this time, the slot
acts as unassigned.
Equipment provisioning
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
5-31
To Next Page
Loading...
