Editing a SNC protection
...................................................................................................................................................................................................................................
When to use
When a specific SNC Protection has been chosen to be changed.
Before you begin
An SNC path should have been provisioned.
Procedures
...................................................................................................................................................................................................
1
Select Protection -> Transmission -> SNC.
Result: The SNC Protected TP Filter window is displayed.
...................................................................................................................................................................................................
2
Make a selection and click OK.
Result: The Provisioned NE SNC Protection Information window is displayed.
...................................................................................................................................................................................................
3
Make a selection from the list and click Details.
Result: The Details Provisioned NE SNC Protection Information window is
displayed.
...................................................................................................................................................................................................
4
Click Edit.
Result: The Edit Provisioned NE SNC Protection Information window is displayed.
...................................................................................................................................................................................................
5
Make a selection for the Hold off Time with usage of the above parameter information
and click
OK.
Result: The switch window closes and the information window is re-displayed.
...................................................................................................................................................................................................
6
Click Close to exit.
Result: The window closes.
E ND OF STEPS
...................................................................................................................................................................................................
Traffic provisioning
...................................................................................................................................................................................................................................
8-188
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
