Parameters for viewing SNC protection
...................................................................................................................................................................................................................................
Capacity box
This selection allows the user to filter on particular cross connect capacities. Values
are: All, VC-4, VC-3, and VC-12.
Slot
Selection of the applicable card types. For VC-12 level the value is fixed to slot TS1.
Port
To select one of the available ports. Values are 1..4 or All.
AU4#
To select one of the AU-4s.
Protected cross connections
List of TPs and their capacity of selected pairs from working TP, protecting TP, and
active TP.
Selected pair
List of TPs of selected pairs from working, protecting, and active reference.
Traffic provisioning
...................................................................................................................................................................................................................................
8-186
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
