5 5Equipment provisioning
Overview
...................................................................................................................................................................................................................................
Purpose
Equipment provisioning provides the configuration data for the 1643 AM and 1643
AMS. Provisioning is the preparatory work that is done to ensure that a network
element (NE) properly functions so that the NE may be included in a network. After
initial provisioning, any subsequent changes in the NE’s equipment mean that
provisioning must once more be performed.
Objective
The correct configuration data is provided for the 1643 AM and 1643 AMS.
Outcome
The objective of equipment provisioning is to eventually include a network element in
an SDH network. To enable the 1643 AM and 1643 AMS to become a functioning part
of a network, it must first be provided with the correct configuration data.
Intended use
This chapter provides all procedures needed to provision the equipment of a 1643 AM
and 1643 AMS network element when using the ITM-CIT. Conceptual information
about equipment provisioning can be found in “Concepts” (p. 5-4).
Contents
Concepts 5-4
Provisioning methods 5-5
Addressing and management concepts 5-8
1643 AM or 1643 AMS configuration possibilities 5-9
Node creation 5-10
Miscellaneous discrete inputs and outputs 5-11
Local alarms signaling 5-12
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
5-1
To Next Page
Loading...
