Viewing and editing node details
...................................................................................................................................................................................................................................
When to use
The purpose of these steps is to view management information or to change the
location of the NE.
Related information
The following procedure is related:
• Create a Node
• “Confirm the MIB” (p. 5-24)
Before you begin
Before performing this procedure make sure:
• Before editing node details, be certain to have the new location for the NE.
The following precaution is important to consider:
• Only one parameter, the location, can be changed by the user. To change other
node details, the MIB must be overwritten and a new node created.
Procedure
...................................................................................................................................................................................................
1
Select Management → Node Details.
Result: The Node Details window appears.
...................................................................................................................................................................................................
2
To change the NE Location, click Edit. Otherwise, go to step 5.
Result: The Edit Node Details window appears.
...................................................................................................................................................................................................
3
Enter the new NE Location.
Result: The correct location now appears in the area provided.
...................................................................................................................................................................................................
4
Click OK.
Result: The new NE Location is entered, and the window Edit Node Details
disappears.
...................................................................................................................................................................................................
5
Click Close.
Equipment provisioning
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
5-47
To Next Page
Loading...
