Remote SHDSL Power Supply (RPS)
...................................................................................................................................................................................................................................
When to use
To view or to edit the information on Remote Power Supply.
Before you begin
No prerequisites or precautions are needed when performing this procedure.
Procedure
...................................................................................................................................................................................................
1
Select Provisioning → Equipment → RPS.
Result: The Remote Power Supply Box Information window appears.
...................................................................................................................................................................................................
2
Click Edit.
Result: The Edit RPS Box Information window appears.
...................................................................................................................................................................................................
3
Select Managed or Unmanaged radio button and click Ok.
...................................................................................................................................................................................................
4
If the RPS Management Mode is Managed, the window will be populated with RPS
MDI, RPS MDO and RPS Port information.
...................................................................................................................................................................................................
5
Click Edit and set the name and also set the status to Active or Inactive in the Edit
RPS MDO Information
window..
...................................................................................................................................................................................................
6
Set the Alarm Suppressed to True or False from the Edit RPS Port Information
window and click Ok.
Result: The window is populated with new information.
E ND OF STEPS
...................................................................................................................................................................................................
Traffic provisioning
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-175
To Next Page
Loading...
